3 FRP Anti-Slip Structures You Can Use for Workplace Safety

Risk management is a major requisite for the owner of industry. Assuring safety as well as the well-being of the workers, not just only ensure employee satisfaction, but also help a lot in increasing productivity. As an industrialist, you will be able to enhance safety in the workplace, only when you come to know the reasons for accidents. 

As per the recent study, slips and falls in the workplace are common. The slippy staircases and floor can make the employees fall and face fatal accidents. The best way to prevent the workers and the visitors from falling is to opt for the anti-slip FRP solutions. Fibreglass reinforced plastic or FRP is the best composite that can offer anti-slip safety solutions. By using the slip-resistant FRP structures and products, you can enhance safety in the workplace. Here are some of the commonly used FRP non-slip products and access systems.    

• Stair Treads 

The stair area involves the most risk in a building. When the stairs steps are used for a long time, they become slippery. Moreover, the use of chemicals and other liquid can also make the area slippy. To prevent slips and falls, you may think of using FRP made, non-slip stair treads. They cover the surface of your concrete stair in the best way, so that the climbers will not fall. Stair treads can provide the climbers with a better grip to their foot. 

• Stair Nosing

Stair nosing is a non-slip access system that is installed on the edges of the stair steps for resisting slips and falls. FRP stairnosing comes in vibrant colours, so that the users can easily notice them even in darkness. Like stair treads, this access system can also offer the users a better grip to their feet. FRP made stair accessories come with multiple advantages, including, non-corrosive, durable, cost-effective and more. For a safe and secure environment in the workplace, do not forget to use this non-slip access system. 

• Grating Structure

Like the stair area, the slippy floor in the entrance of a building also involves many risks. To enhance safety, it is better to install FRP grating structures. The non-slip grating platforms will also resists the users from falling and meeting accidents. Industries and public infrastructures are the places where you will find the best of the use of grating platforms. FRP anti-slip deck is the best solution for the slippery ramps, catwalks and more. Marine, oil and chemical factories, railway stations are the best places to install them. 

• The Unique Features of FRP

All the FRP access systems, like, stair nosing, stair treads, and grating structures have come with the best characteristics of their parental material, i.e., fibreglass. Some of the best features of FRP include, 

1. Anti-slip 
2. Resistant to corrosion, heat and electric
3. Robust and light weighted
4. Durable and cost-effective 
5. Flexible and customizable 

Apart from the mentioned, there are more. For the best quality FRP products, you should choose the product manufacturer and supplier wisely. 

Why FRP Pultrusion Is Right for Building Your Industrial Workshop

Since the development of industrialization, we have seen the uses of different traditional materials for building an industrial workshop. The list generally includes steel, aluminium, timber and other similar materials. But if you pay a closer look then you will understand that there are several disadvantages of using traditional materials. So at the first stage of the post, we will discuss why you need an alternative and later on we will also reveal how Pultrusion of FRP can fill that gap.

• Why Do You Need an Alternative?

Well, you can choose any of the traditional materials mentioned above but in that case, the in-house performance of your workshop will be affected. For example, none of the traditional materials has the ability to offer a non-slip surface for walking, climbing heights, or taking loads from one place or floor to another. Due to this reason, the chances of accidents in your workshop get increased automatically. As a result, it directly harms the in-house performance of your workshop by preventing labourers from giving their best in the workplace.

Due to this reason, owners are always suggested to opt for different types of construction FRP products because this material is known for their non-slip performance. As a result, when you opt for this material you boost the in-house performance of your workshop by reducing the chances of industrial accidents. In addition, the material is also known for its sturdy nature. So, you can also use this material to build a workshop in any corrosive environment.

However, the story is completely different when it comes to traditional materials. For example, steel cannot stand the corrosiveness of offshore areas, timber cannot stand water etc. So, these are the main disadvantages that you have to face if you choose traditional materials for building the workshop.  Hope the facts have helped you to understand why you need an alternative for building your workshop. In the next stage, we will figure out why pultruded fibreglass is the best option available for you.

• How FRP Pultrusion Fill the Gap

Composite material like pultruded FRP is ideally crafted so that it can eliminate all the workshop building issues of owners. Apart from the benefits mentioned it also offers comprehensive electrical transparency. Due to this reason, you can also use the material in electrical workshops without the fear of electrical accidents.

This is all for today.  Hope it will help you to understand why FRP is the right choice for you for building your own workshop.

3 Reasons Why You Must Install Handrails in Workshops

A recent study has revealed the fact that most of the accidents in the industrial workplace occur due to accidental slipping, skidding and falling. Such unfortunate accidents not only hampers the efficiency of the labour but in extreme cases, it also ends up causing serious injuries to the person. 

So, owners are always suggested to improve the safety measures in their workplace. It will not only make the workshop a safe and better place for working but in addition, it will also improve the in-house production.

• Preventing Accidents

There are many ways of preventing the chances of accidents and owners can do it according to their convenience. For example, the job can be done easily simply by installing anti-slip walkways, platform or access systems. However, most of them forget to look after handrails. Just look around yourself and you will find that most of your platforms or stairs are not equipped with safety handrail systems. 

In a situation like this, installing handrails will help you to prevent the chances of accidental falling and slipping in the workplace. In the below section we will take you through the top 3 reasons that will help you to understand the importance of installing handrails in the industrial workplace.

1.   Unpleasant weather conditions like rain or cold make the stairs, platform systems, access systems slippery. So it becomes really dangerous for labourers to use that platform or access system to move a heavy load. The same problem also occurs when they try to move goods from one floor to another by using the stair. In a situation like this handrails help workers to maintain the balance and help them to avoid accidental falling or slipping. 
2.  Daily laborious work often causes weakness and muscle pain to workers. It makes them unable to focus on their core job. However, handrails help labourers to boost their confidence and enable them to use the platform, access or stair systems confidently.
3. There are many people who suffer from vertigo. It refers to the problem that climbers face with height when climbing the stair. In a situation like this the support of a handrail system help people (with vertigo) to climb up or down the stair confidently.

So, these are the reasons why you should install handrails in your workplace. FRP is known for its anti-slip profile. So it is also suggested to use only FRP made handrail system. Owners can contact a quality FRP manufacturer to enhance the safety measures of their workplace.

FRP Grating – Brief Note on Manufacture Process and Advantages

FRP or Fibreglass Reinforced Plastic has bought a revolution in the industrial as well as commercial businesses. The kind of the benefits these products offer are simply unmatchable and this is why most of the business owners are looking forward to install FRP made structure in their workplaces.

One such useful and effective structure is FRP grating and they are manufactured with a combination of a matrix of fibreglass as well as resins. This post discusses the manufacturing process of these products along with their advantages to the businesses. 

 

Manufacturing Process

Before dwelling into the process, it is important to mention that these FRP solutions are manufactured using two different methods. Both of them are discussed below.

• Pultrusion

In this process, the makers make use of the fiber reinforcements along with the matrices of the thermosetting resin. Reinforcement materials like woven fabric, stitched fabric as well as FRP roving are selected beforehand and drawn through a bath of resin. During this, a liquid of thermosetting resin is used to impregnate all the materials.

Now, this led to the formation of wet-out-fiber in the geometric shape. Afterwards, the fiber is then pulled into a die of steel that has been heated. Then the process of resin cure starts with a control of precise raised temperature. This results in the solidification of the laminate in the shape of the cavity die.

• Molded Grating

This is entirely done by the placement of the continuous glass fibers in the vertical and horizontal directions in the mold. The glass fibers are wetted with the resin thoroughly layer by layer. When the weaving process completes, the mold gets subjected to heat just to cure the panel.

Afterwards, the panel is removed from the mold. This result in the formation of the standard panel is concave manner. Overall, the continuous process leads to the formation of a one-piece panel that has got corrosion resistance as well as exceptional bi-directional strength.

Advantages of Fibreglass Grating

FRP has become one of the most commonly used products in the industrial as well as commercial workplaces. The growing demand of the solutions grating, anti-slip rung or any other products shows that they are highly effective and apt to be used in different workplaces. The advantages of these solutions are:

• They are highly resistant to hostile environments as well as chemicals
• They are poor conductors of electricity and thus it makes them ideal to be used in the power plants
• They do not require regular maintenance.
• They have rough surface and thus eliminates the possibilities of slips and falls
• They are extremely light in weight and have a density that is less than 4 times that of steel and 1 times off aluminum.
• They have properties like fire retardant and thermally insulated.

Hope the pointers discussed above are relevant and the readers have understood the importance of these solutions. Make sure that they are properly installed in your workplace to get optimum value. Please feel free to share your thoughts and opinions about the post below in the comments box.

The Six Beneficial Characteristics of FRP or Fibreglass

Fibre-reinforced plastic (FRP) or fibreglass is a modern-day material that has managed to become much popular in the domestic, commercial as well as constructional domains. Used by manufacturers to build diverse products such as panels, handrails, beams, ladders, instrumentation stands, etc., this composite found wide-ranging application in the extensive sectors of petrochemicals, food & beverage, mining, marine & shipping, sewage treatment and public infrastructure. With so many traditional elements such as steel, wood, cement, aluminium readily available, are you wondering as to why one must use FRP? Well, because this composite can provide unimaginable benefits and some of those are mentioned below in brief. 

 

The Positive Side of Fibre-Reinforced Plastic or Fibreglass

• Unlike the conventional elements, names of which are stated prior to this point, FRP is light in weight. Thus, we can fairly conclude that the products made out of it such as safety handrail systems or cable instrumentation could be easily carried from one place to another and installed practically without any effort.

• Although light-weighted, FRP solutions are noted for having high tensile strengths and enduring capabilities. In other words, the structures that are constructed out of this composite can withstand extreme conditions starting from heavy loads, high pressure and severe environmental inconsistencies.

• Unlike other construction elements, fibreglass products allow seamless on-site fabrication. One does not have to utilize acetylene torches or bulky welding equipment to cut and mould them into desired shapes. Manufacturers can use the everyday carpentry tools with carbon or diamond-tipped blades.

• FRP is noted for having excellent resistant properties. The reinforced surface of this material is not affected either by corrosive compounds or caustic chemicals. The composite is also impervious to heat, fire and insect infestation. Thus, we could say that all the products made out of this material are extremely durable and would last easily for prolonged periods.

• Fibreglass has minimum thermal conductivity due to which the outer surface of the material can always maintain a low temperature. It is due to this reason that FRP products stand great for residential projects. The material is also dielectric or a non-conductor of electricity, which makes it absolutely efficient.

• Finally, yet importantly, fibreglass products could provide maximum anti-slip safety to the workers because of their traction properties. Moreover, manufacturers do not really have to spend much on their maintenance. Accumulated dust and dirt along with stubborn stains could be cleaned through the use of mild detergents. FRP products must be polished so that they can retain their brand-new lustre for long.

The aforementioned six pointers are distinctive characteristics of fibreglass and it is due to them that the composite has acquired a strong footing over the manufacturing sectors and got immense recognition all across the globe.

Revealing the Benefits of Installing Fibreglass Stair Nosing

Owing to the number of mishaps and accidents both major and minor in the workplace, most of the business owners are concerned about the safety of the workers working in such harsh conditions. It is the responsibility of the architect to make sure that the workplace is free from any kind of hazard, which may call a danger to lives of the workers. So, if you also want to avoid any mishap in your workplace then opt for installing fibreglass stair nosing. 

Are you not aware of the term stair nosing? No need to worry as in this post you will have a decent amount of information about the same and you will get to know the benefits of installing the device in the workplace. 

What is Stair nosing?

A kind of functional products mainly used on the edges of the steps/stairs in order to ensure safety and security of the workers. Because of extreme pressure and huge traffic, the staircases tend to get damaged and they even get slippery. All these increase the possibilities of accidents, but installing fibreglass platforms on the edges in form of nosing will safeguard workers from slips and falls.

 

What are the Benefits?

·         It does not get Affected by Heat, Electricity, Corrosion  and Weather Changes

FRP is a poor conductor of heat as well as electricity and this ensures that the overall quality of the product does not deform in any given conditions. The best thing is that even after getting in direct contact with shock or flames, the structures will remain robust. Then comes the anti-corrosion features which protect the device from being damaged even after coming into direct contact with reactive chemicals. 

·         If offers Better Grip

One of the major reasons for the occurrence of accidents is mainly because of the slips. Most of the people miss their steps and they fall from the stairs. However, stair nosing system made up of FRP provide a better grip to the feet of the people and safeguard them from sudden fall and slips. In addition to that, nosing structures also offer extra space to the stair which allows people to place their feet properly. 

·         Better Outlook of the Stairs

The overall design of the FRP stair nosing is aesthetically pleasing and it enhances the overall outlook of the stairs. The best thing is that they are available in a variety of colors. Businesses can get the structures as per the requirements in terms of size, color, and get them customized based on the usage in a specific workplace.

So, get your structure now and ensure that your workers work in a safe environment. It will help you to win trust of your workers and it will increase the productivity of your employees. Get in touch with a professional dealer to get the structure to be installed in the workplace.

Why FRP Pultruded Gratings Are Imperative For Industry?

Industries and commercial sectors, regardless of its industry type and size, prefer using grating for flooring purposes. Therefore, several manufacturers have cropped up around the globe who utilize a variety of raw materials such as aluminum, steel, FRP, and GRP. Out of all of these materials, most of the industries of this twenty-first century prefer using FRP pultruded grating in their workplace. After the advent of such kind of grating, other traditional materials have got a definite set back in the present-day industries. And why not! After all, FRP materials are resistant to chemicals and acids, and moisture etc. Besides, these materials, being lightweight in nature, can be available in various color options; so it can even suit the taste of yours very easily.

Special features of FRP grating: 

As per most of the experts, FRP made components are perfect for any of the heavy-duty applications since these materials have been both cost effective and long lasting simultaneously. In addition, no industrialists can deny the flexible as well as versatile nature of FRP materials; hence this type of grating becomes so much popular these days. Besides, it won’t get deformed even for a heavyweight. But, why this item is called pultruded? Basically, this kind of items has been made out a process called pultrusions. In this process, resistant polyester and resin bath matrix have been mixed together.  

Types of FRP Grating Products:      

Truly, there are several types of fiberglass grating available in the market; and each of the variations is utilized in diverse environmental conditions.

·         FRP Molded Gratings: Basically, this type of gratings are composite products made by glass fiber and resins. The mixture is left to moisturize thoroughly and then crafted adequately by the open mold matrix. This kind of gratings is very much effective for safety issues especially in environments associated with oil, liquids, and chemicals.

·         FRP Heavy Duty Gratings: Well, this is perfect in conditions where corrosion and chemical attacks are pretty common. That’s why; this element has become imperative in industries like food and beverages, chemical, and water treatment plants. Other than these, you can use it in oil and gas refineries as well.

·         FRP Pultruded Gratings: In construction and architectural industries, offshore power plants and food processing plants businessmen prefer using this type of grating.

Other than this, another very significant item that proves to be very effective nowadays is Stairnosing. Basically, this type of material is used to extend the life of your staircase since stairnosing can help you minimizing the scratches scuffs, and stains that tarnish the surface. Besides, this item is very easy to install and replace.  You can choose any of the reputed service providers to grab the best opportunity of such items.